Pages

▼

Tuesday, May 3, 2011

Pressure Cooker Vacuum Chamber

Some pics of my pressure cooker to vacuum chamber conversion.  I used a $6 aluminum pressure cooker I found at the salvation army.

I removed the pressure release and tapped a 1/4" NPT hole for a hose barb connection.  I then milled a flat area and window to mount some lexan.


 Setting up the lid for milling

Milling the window on my drill press and X/Y table

Completed Result:


I used RTV silicone to mount the lexan window

at

4 comments:

  1. Too Many PartsSeptember 12, 2011 at 1:53 PM

    Have you tested this, yet? Does it actually work?

    ReplyDelete
  2. Scott GibsonSeptember 13, 2011 at 12:44 AM

    I'll have to add some more pics, it works well I have used it for degassing plaster and epoxy.

    ReplyDelete
  3. UnknownOctober 16, 2017 at 5:44 AM

    the above pressure cooker vacuum chamber is fine and i need to buy it
    pressure cooker online

    ReplyDelete
  4. Routerlogin NetMay 3, 2018 at 3:39 AM

    Thanks for sharing kind of information with us . Here you will get all kind of solution like
    Routerlogin Net
    Routerlogin

    ReplyDelete